Description: As a stainless steel chain hoist as a lifting device, during the lifting process, shaking, especially large-scale shaking, is a problem we taboo. Especially for the manual lifting equipment such as stainless steel chain hoist, the shaking phenomenon often appears.
设备的不锈钢手拉葫芦 ，在起升过程中，出现晃动尤其是出现大幅度的晃动是我们很忌讳的问题。 As a lifting equipment of stainless steel chain hoist , during the lifting process, the occurrence of sloshing, especially large-scale sloshing, is a problem we taboo. Especially for the manual lifting equipment such as stainless steel chain hoist, the shaking phenomenon often occurs. We all know that shaking is very bad, but we don't know where the problem is. Today, I will talk to you about the main reason for the hoisting of the hoist.
1. During the overload use of stainless steel chain hoist, especially when raising a certain height, it is easy to shake slightly, especially for the chain. So please do not overload any lifting equipment.
2. If there are cracks or damage to some of the links in the chain, it will cause the left and right shaking in the process of lifting the product. Please replace or repair the chain in time.
3. During the pulling process, the operator is fast and slow, and the force is also large or small or an emergency stop occurs. This will cause the hoist to be unable to perform the upper and lower operations stably and shake. When pulling the hand zipper strip, keep it rising slowly and evenly.
4, there is a heavy object is not directly below the lower hook, and the cargo is diagonally below the hook, which will cause the chain to shake in the direction of the hoist during the lifting process.
The above mentioned stainless steel chain hoist shaking problems are mainly 1 and 3. These two kinds of errors are very easy for the operator to make. Try to avoid the errors by using the personnel as much as possible.