开心十三张

Welcome to Hunting Eagle Albert CHAN Lifting Equipment Co., Ltd.
Favorites / Contact Hunting Eagle

Explosion-proof electric hoist

Beijing Lidiao Lifting Equipment Co., Ltd.

Stainless steel pull / electric hoist-service provider

155-3110-7201

185-1986-1704



Current position: Explosion-proof electric hoist > Industry information

    Safety requirements for explosion-proof chain hoists


Description: Explosion-proof chain hoist should refer to its instruction manual before use, and understand its technical performance. Pay attention to the following issues when using:
Before using the explosion-proof chain hoist, please refer to its instruction manual to understand its technical performance. When using it, pay attention to the following issues:
a) When using a tripod for explosion-proof chain hoists, the three feet must be kept at a relative distance, and the two feet should be connected by ropes. When the connecting ropes are placed on the ground, care should be taken to prevent the operator from being knocked over.
Explosion-proof chain hoist
b) The lifting height of the explosion-proof chain hoist must not exceed the specified value to prevent the chain from breaking the pin and causing an accident.
c) When the explosion-proof chain hoist pulls the hand zipper, the zipper direction must be perpendicular to the hand zipper wheel.
d) Explosion-proof chain hoist is strictly forbidden to prevent the chain from being caught.
e) Explosion-proof chain hoists must be inspected in detail before operation, including each link of the chain, and they can only be used when they are in good condition.
f) The explosion-proof chain hoist must not be overloaded.
g) Explosion-proof chain hoist lifting chain requires vertical hanging heavy objects. There must be no wrong buttons between the links of the chain.
h) When the explosion-proof chain hoist is pulled, it must be applied stably to avoid jumping chains or jamming chains. When you find it difficult to pull, you should check the cause in time, do not pull hard, and do not increase the force, so as not to break the chain or the pin.