开心十三张

Welcome to Hunting Eagle Albert CHAN Lifting Equipment Co., Ltd.
Favorites / Contact Hunting Eagle

Explosion-proof electric hoist

Beijing Lidiao Lifting Equipment Co., Ltd.

Stainless steel pull / electric hoist-service provider

155-3110-7201

185-1986-1704



Current position: Explosion-proof electric hoist > Industry information

    Summarize the use requirements of stainless steel chain hoist


Description: Stainless steel chain hoist and stainless steel chain hoist are collectively referred to as stainless steel chain hoist, stainless steel chain hoist is a manual type, the use requirements are as follows:
Stainless steel chain hoists and stainless steel chain hoists are collectively referred to as stainless steel chain hoists. Stainless steel chain hoists are manual models. The requirements for use are as follows:
1. It is strictly forbidden to use it in overload, and it is forbidden to operate with power other than human power. Before use, make sure that the parts are intact, the transmission part and the lifting chain are well lubricated, and the idling condition is normal. Check whether the upper and lower hooks are fastened before lifting. Do not erroneously carry heavy objects on the top.
2. After cleaning and maintenance of stainless steel chain hoist, no-load test should be performed to confirm that it is working normally and the brake can be delivered before use. The friction surface of the brake must be kept clean, and the brake part should be checked frequently to prevent brake failure and self-falling of heavy objects.
Stainless steel chain hoist
3. The stainless steel chain hoist lifting chain should be hung vertically, there must be no twisted chain links, and the lower hook rack of the double-row chain must not be turned over. The operator should stand and drag the hand chain in the same plane as the hand sprocket, and rotate the hand chain in a clockwise direction to raise the weight; drag the hand chain in the opposite direction, and it can be changed at noon. When lifting heavy objects, personnel are strictly prohibited from doing any work or walking under the heavy objects to avoid personal accidents.
4. During the lifting process of stainless steel chain hoist , no matter the weight is rising or falling, when pulling the bracelet, the force should be even and gentle. Do not use too much force to avoid the bracelet jumping or snapping. If the staff finds that the pulling force is greater than the normal pulling force, they should stop using it immediately. Maintenance method: After use, the gourd should be cleaned and coated with anti-rust grease and stored in a dry place. Maintenance and inspection should be performed by persons who are more familiar with hoist mechanisms to prevent those who do not understand the principle of the machine's performance from being dismantled at will.