Description: Explosion-proof chain hoists are widely used, and they need to be operated in accordance with standardized procedures when used in various industries. Today we will introduce the sequence of explosion-proof chain hoists in use.
Explosion-proof chain hoists are widely used, and they need to be operated in accordance with standardized procedures when used in various industries. Today we will introduce the sequence of explosion-proof chain hoists in use.
First, the first time to get the explosion-proof chain hoist to install, we need to find a professional to install the explosion-proof hoist, after the installation is complete, the explosion-proof hoist is also checked, and a test load test.
Second, before daily work, we also need to carry out routine inspections on explosion-proof chain hoists to see if internal parts, hooks, chains, etc. are damaged. If the damage is severe, we need to replace the parts immediately. The replacement parts must be replaced from Purchased by the original manufacturer in case the parts are not uniformly affected.
3. When we carry out lifting operations, we need to use them in strict accordance with the instruction manual. It is forbidden to use diagonal pull, hard pull, overload, etc. During the operation, be careful not to twist the wrong chain. The operator must operate the chain on a flat surface with the hand sprocket. When lifting, it is forbidden to move under the cargo to avoid causing accidents.
Fourth, after use, we also need to clean the explosion-proof chain hoist, and then apply anti-rust oil, and store in a dry environment.
The above is the correct sequence for operating explosion-proof chain hoists. I hope you can follow these operations so that you can use explosion-proof hoists for a long time. If you have other comments or suggestions, please call us.
防爆手拉葫芦摩擦片变薄的原因 浅析防爆手拉葫芦安全使用规定 Related Searches: Analysis of the Causes for the Thinning of the Friction Plates of Explosion-Proof Chain Hoists